Need help?Do you have a question about the Apple Xserve series and is the answer not in the manual?
General| Networking | Dual Gigabit Ethernet |
|---|---|
| Form Factor | 1U Rackmount |
| Processor | Intel Xeon (various models) |
| Storage | Up to 3TB (using three 1TB SATA or SAS drives, depending on the specific Xserve model). Options for hot-swappable drives. |
| Expansion | PCI Express slots (number and type vary depending on the specific Xserve model) |
| Operating System | Mac OS X Server |
Provides an overview of the Xserve and details on the Server Identifier Light/Button for locating the server.
Details essential steps before opening the server, including serial number, unlocking, shutdown, and ESD precautions.
Lists required tools and preliminary steps before handling the hard drive module.
Step-by-step instructions for removing a hard drive module from the server.
Details tools and preparatory actions needed before opening the server chassis.
Step-by-step guide on how to open the server to access internal components.
Lists required tools and preliminary steps for installing DIMMs.
Instructions on how to remove and install DIMMs, including handling precautions.
Details the dual-slot and single-slot riser cards and their specifications.
Provides preliminary steps and handling guidelines for PCI or AGP cards.
Lists required tools and preliminary steps for optical drive replacement.
Step-by-step instructions for removing and installing the optical drive.
Details the tool and preliminary steps required for heatsink service.
Instructions for removing the heatsink, including thermal grease replacement.
Lists tools and preparatory steps for processor replacement.
Step-by-step guide on how to remove the processor from the server.
Details tools and preliminary steps for power supply service.
Instructions for removing and replacing the power supply unit.
Lists tools and preparatory steps for logic board replacement.
Step-by-step guide for removing the logic board from the server.
Covers what's new, server configuration, hot-pluggable drives, and diagnostic tools.
Procedure for resetting the Power Management Unit (PMU) to resolve system issues.
Steps to test the server's power supply using a voltmeter.
Explains server status lights and details diagnostic tools like Apple Hardware Test.
Diagnosing issues related to server startup, memory errors, and flashing lights.
Troubleshooting common problems with Video, Hard Drives, CD Drives, and USB/FireWire devices.
Addresses network connectivity problems and other miscellaneous system issues.
Diagrams illustrating the internal components and layout of the Xserve.
Diagrams showing the front and back panels of the Xserve and their ports.
Guide on how to start the Xserve from a CD-ROM disc for installation or diagnostics.
Procedure to verify the server's IP and hardware (MAC) address using Server Assistant or Terminal.
Steps to discover the Xserve on the network using Terminal or Server Assistant.
To Next Page