Need help?Do you have a question about the APPLIED ACOUSTICS SYSTEMS Easytrak Nexus Lite 2695 and is the answer not in the manual?
General| Brand | APPLIED ACOUSTICS SYSTEMS |
|---|---|
| Model | Easytrak Nexus Lite 2695 |
| Category | Marine Equipment |
| Language | English |
Describes the main console unit of the Easytrak Nexus system.
Details the transceiver unit, its sensors, and function.
Describes the 1000 Series Beacon and its features.
Instructions for installing the software and necessary drivers.
Details on installing the Easytrak Nexus 2695 Console unit.
Methods for deploying the Easytrak Nexus 2683 Transceiver.
Steps and indicators for powering on the Easytrak Nexus system.
Explanation of the status indicators on the console's front panel.
Overview of the software's interface, including menus and windows.
Defines visual elements, preferences, display options, and startup files.
Configures external inputs (GPS, Gyro), data output, and operating modes.
Setup and configuration of beacons, including editor, receiver, visuals, and filtering.
Setting offsets from reference point to transceiver and fixed installation.
Configuring transceiver depth and Velocity of Sound (VOS).
Adjusting compass smoothing and magnetic declination.
Manually entered parameters for UTM coordinate system setup.
Tool for calculating UTM zone and grid origin.
Selecting internal or external triggering for system cycles.
Fixed Interval, Auto Calculate, and Fastest Possible modes.
Customizing the order of beacon interrogations.
Importing Sound Velocity Profile (SVP) data.
Setting beacon type, range, VOS, channel, and tracking.
Configuring V-Nav ID, receiver filtering, and gain.
Customizing beacon display with labels, icons, trails, and overlays.
Viewing position, signal quality, and applying gating/smoothing.
Adjusting Kalman filter settings and parameters for accuracy.
Operating 5xx series release beacons: ID, status, and actions.
Operating 15xx series release beacons: ID, status, and actions.
Setting plot display mode, colors, scale, and trail points.
Managing waypoints, placemarks, and centering the view.
Displays vessel parameters: heading, pitch, roll, and GPS position.
Displays transceiver status: heading, pitch, roll, and depth.
Procedures for updating console and transceiver firmware.
Enabling advanced mode and using the acoustic monitoring tool.
Accessing system details and requesting technical support.
Method for calculating transducer alignment error.
Procedure to calibrate the acoustic system for alignment errors.
System status during acquisition and monitoring tools.
Toolbar and context menu for plot window during acquisition.
Setting vessel size and calibration offsets.
Various methods for calibration, e.g., Cardinal Points, Figure of 8.
Importing, merging, saving, and managing logged data files.
Setting titles for printouts in the database.
Processing logged data, auto compute, and quadrant computation.
Options for spurious data and applying corrections.
Troubleshooting the front panel power light.
Resolving issues with no signal return at any range.
Diagnosing and fixing incorrect range measurements.
Addressing problems with short-range performance.
Troubleshooting bearing instability and potential range issues.
Pin assignments for the serial connectors.
Pin assignment for the BNC connector.
Table of AAE Spread Spectrum channels and parameters.
Table of Simrad HPR channels and parameters.
Table of Simrad HiPAP channels and parameters.
Table of ORE Trackpoint channels and parameters.
Details of AAE and AAE V2 data string formats.
Format of the ORE Trackpoint 2EC data string.
Format of the Simrad HPR 300P data string.
Format of ORE Trackpoint STD-EC W/PR data string.
Structure of the Simrad HPR 309 data telegram.
Format of the Simrad $PSIMSSB data string.
Format of the Simrad $PSIMSNS data string.
Format of the Pseudo $GPRMC data string.
Formats for KLEIN 3000 SSS data.
Format of the Pseudo $GPGGA data string.
Details console dimensions, power, connectivity, and indicators.
Details transceiver material, dimensions, accuracy, and environment.
Diagram and specifications for mounting bracket A.
Diagram and specifications for mounting bracket B.
Detailed dimensions for transducer mounting.
Wiring details for the deck cable.
Information on the remote serial application.
To Next Page