EasyManua.ls Logo

Aprilaire 213 User Manual

Aprilaire 213
1 page
Page #1 background imageLoading...
Page #1 background image
Model 213, 313 & 413 Media Installation
P.O. Box 1467 • Madison, WI 53701-1467 • Phone: 800/334-6011 • Fax: 608/257-4357 • www.aprilaire.com
10010442 6.13
B2701313A
© 2013 Aprilaire – A division of
Research Products Corporation
Install filter with Air Flow pointing
toward Furnace or Air Handler.
Remove door.
Remove dirty filter.
IMPORTANT: Turn thermostat mode to OFF.
Turn fan to AUTO.
Press Reset on air cleaner control.
Control may be mounted in living space.
Return thermostat to original settings.
Align filter in top and bottom rails
and slide into place. Reinstall door.
Expand clean filter.
Install filter with Air Flow pointing
toward Furnace or Air Handler.
Remove door.
Remove dirty filter.
IMPORTANT: Turn thermostat mode to OFF.
Turn fan to AUTO.
Press Reset on air cleaner control.
Control may be mounted in living space.
Return thermostat to original settings.
Align filter in top and bottom rails
and slide into place. Reinstall door.
Expand clean filter.
Question and Answer IconNeed help?

Do you have a question about the Aprilaire 213 and is the answer not in the manual?

Aprilaire 213 Specifications

General IconGeneral
MERV Rating13
Filter Life6-12 months
Filter TypePleated
Product TypeAir Filter
Maximum AirflowNot specified in official documentation, but designed for residential HVAC systems.

Summary

Thermostat Preparation for Installation

Set Thermostat Mode and Fan

Set thermostat mode to OFF and fan to AUTO before proceeding with installation.

Air Cleaner Filter Installation

Remove Unit Door

Remove the door of the air cleaner unit to access the filter compartment.

Expand Clean Filter

Expand the clean filter to prepare it for insertion into the unit.

Install Filter with Correct Air Flow

Install filter with Air Flow pointing toward Furnace or Air Handler.

Reinstall Unit Door

After inserting the filter, reinstall the unit door.

Air Cleaner Control Operation

Reset Air Cleaner Control

Press the reset button on the air cleaner control unit to acknowledge filter replacement.

Final Thermostat Adjustment

Return Thermostat to Original Settings

Restore the thermostat to its original operating mode and settings after installation.