USER PREFERENCES
AWAY BUTTON
While this thermostat has heating and
cooling setpoints pre-programmed for use
with the Away feature, you may prefer
other temperatures. The steps below
do not activate or deactivate the Away
mode, but they do tell the thermostat
what setpoints to use when you choose
to activate it.
1. Touch Away Button to open the Away
Settings screen.
The current Heat and Cool setpoints
and Fan modes are shown and can be
changed by touching their respective
settings. These are the settings that
will be used while Away is active.
2. Touch HEAT or COOL to open the
temperature pop-up.
3. Touch the or arrows to adjust
the setpoints to be used while Away
is active.
4. Touch Done to save any changes.
Touch Back to discard your changes.
34
2
4
3
1
To Next Page
Loading...
