Aprilaire E100 - Starting Up the Unit and Sequence of Operation; Using the Dehumidifier Control Only; Using a Model 76 as a Remote Control; Using an External Control

ENABLING DEH W/AC
To allow dehumidication during active air conditioning, select
ENABLED and press the MODE button.
To disable dehumidication when the air conditioning is on,
select DISABLED and press the MODE button. This option may
be preferable when the air conditioning system has difculty
maintaining the desired set point.
APPLYING AN RH OFFSET
An offset can be applied to the onboard humidity reading to
avoid discrepancies with other humidity-measuring devices in
the home. Use the
or button to select an offset from -5%
to 5%. Press the MODE button to exit the installer setup screens.
SETTING UP REMOTE CONTROL – CRAWL SPACE/SEALED ATTIC
If wiring to a Model 76 for remote control (see pages 13 and 19
for details) press the
or button to ENABLE.
SETTING UP VENTILATION
See page 14 for details if using the dehumidier for ventilation.
SETTING UP ZONING
See page 15 if zoning the dehumidier.
SETTING UP EXTERNAL CONTROL
If wiring to an external control (see page 13 for details) press the
or button to ENABLE.
17