APsystems China
Rm. B305 No.188, Tomson Center, Zhangyang Road, Pudong, Shanghai , China ｜+86 21 33928205
Network searching state：
Slow flicker (0.2s blue light flicker/2s light o)
Access network state:
Alternating flicker (0.2s green light flicker/2s blue light
flicker)
After the LTE USB dongle is plugged into the Energy Communication Unit (ECU), wait about
15 seconds for the LTE USB dongle to start to operate. User can judge the working state of
LTE USB Dongle through the indicator.
Indicator of LTE USB Dongle
Insert the Nano SIM into the SIM Card Slot of LTE USB dongle,
Then connect the LTE USB dongle with the energy communication Unit (ECU) through the
USB interface. Once the ECU is powered on, the Dongle can be connected to the 4G network.
ECU cellular set-up
ECU-C and LTE USB Dongle ECU-R and LTE USB Dongle
Note: LTE USB dongle only supports the USB connection; Once
the LTE USB dongle is plugged into the ECU, it does not need any
special settings in the ECU_APP. (see ECU Quick Install Guide for more
info on the ECU_APP and the commissioning method).
To Next Page
Loading...
