Equipment Packages to fit your operations
• Available in a variety of sizes to fit your counter space:
• Compact HR(S)-20S (10 rollers and 13" cooking surface across)
•
Regular size HR(S)-31S (10 rollers and 19 1/2" cooking surface across)
•
Full Menu sizes HR(S)-50S (10 rollers and 30 1/2" cooking surface across)
• Available in Chrome or New "Tru-Turn" textured rollers.
• Unit is designed to be used in a "clerk served" operation or in a
customer "self-serve" merchandising plan. For counters between
clerk and customer, the Slanted Roller Grill is available with
reversible "rear controls" and a "pass-through" sneeze guard.
Designed to deliver great tasting Hot Dogs
• Roller Grill heats quickly and has a fast recovery for unexpected
surges in Hot Dog demand.
• Heating system has two cooking zones that can be turned to Grilling
temperatures for cooking Hot Dogs in less than 4 minutes* and
turned down to NSF-safe holding temperatures for serving customers.
• HR(S)-20S slanted Equipment can grill 306 Hot Dogs per hour.
• HR(S)-31S slanted Equipment can grill 460 Hot Dogs per hour.
• HR(S)-50S slanted Equipment can grill 765 Hot Dogs per hour.
*Grill times based on Pre-heated roller grill (about 10 minutes warm up cycle).
Easy to Operate and Maintain
• "Easy to read" graphics and heavy duty knobs on the control panel
make it easier for employees to operate at the correct temperatures.
• Infinite Control system gives operator the maximum ability to adjust
temperatures to a variety of hot dogs, sausage, egg roll, or other roll
type products.
• Roller Grill is designed to require minimal labor:
• New "Tru-Turn" coated rollers just wipe clean with damp rag.
• Raised rollers allow cleaning in "hard to reach" areas.
• Removable grease collection pan is simple to clean.
• Easiest Roller Grill in the industry to service:
• Unit is supplied with "easy to remove" side and bottom panels.
• Dependable, high torque motor is one of the most dependable in
the industry.
• Warranty includes on-site repairs, reducing the amount of potential
down time.
Built for Long Life!
•
Exterior cabinet is constructed of stainless steel for maximum durability.
• Made with heavy duty wiring.
• "Tru-Turn" coating is 30% thicker than competitive non-stick coatings.
• Teflon seals at end of rollers stop grease from migrating into motors
and chains.
Reliability Backed By APW Wyott's Warranty
• APW Wyott's Hot Rod Roller Equipment is backed by a 1 year limited
warranty and a one year on-site labor warranty
• Certified by the following agencies:
Rev. 1/1/2003
To Next Page
Need help?
General