IP Address: Enter the IP address of your Router or reset it in
dotted-decimal notation Wireless-N Router (factory
default: 192.168.0.1).
Subnet
Mask:
An address code that determines the size of the
network. Normally use 255.255.255.0 as the
subnet mask.
DHCP Type: Server, Client or Disable
Note:
1) If you change the IP Address of LAN, you must use the new IP
Address to login the Router.
2) If the new LAN IP Address you set is not in the same subnet, the IP
Address pool of the DHCP server will change accordingly at the
same time, while the Virtual Server and DMZ Host will not take
effect until they are re-configured.
5.5 Connect to Internet (Gateway)
Please click „TCP/IP SettingsWAN Interfaces‰ located at the web
management interface, Following example is for „PPPoE‰ WAN setting.
To Next Page
Loading...