Aqua Clear 30 - Preparing Filter Inserts; Rinsing and Preparing Inserts; Filter Insert Maintenance Strategy

2
PREPARING FILTER INSERTS
®
ALL FILTER INSERTS MUST BE RINSED THOROUGHLY PRIOR TO INSTALLATION.
AquaClear
®
Foam Filter Insert: Rinse Foam Filter Insert and place into filter basket first.
The foam block should totally fill the bottom of the basket leaving no space between the
filter basket base and sides.
Replace Foam Filter Insert every two months.
AquaClear
®
Activated Carbon Filter Insert: Remove Activated Carbon Insert from protective
plastic bag and rinse pouch to remove any carbon dust particles. Flatten insert and place
horizontally on top of Foam Filter Insert.
Replace Activated Carbon Insert every month.
AquaClear
®
BioMax Filter Insert: Open
poly bag and transfer contents into mesh
bag. Apply locking clip as shown, trim
excess mesh, and thoroughly rinse insert
materials before placing on third level of
the basket.
Replace BioMax Insert every three months.
NOTE: Regular replacement of AquaClear
®
filter inserts is essential for optimum filter
performance.
FILTER INSERTS MAINTENANCE
AquaClear
®
Foam, Activated Carbon and Biomax Inserts should be changed alternately in order to maintain continuous biological
activity. Follow individual packaging instructions for recommended replacement intervals.
Never replace all Filter Inserts in any AquaClear
®
Power Filter at the same time.
®