Need help?Do you have a question about the Aqua Leader Contempra Round and is the answer not in the manual?
General| Brand | Aqua Leader |
|---|---|
| Model | Contempra Round |
| Category | Swimming Pool |
| Language | English |
Prohibits jumping or diving into the pool from the top rail or deck.
Emphasizes the need for constant supervision and someone to assist in emergencies.
Stresses the importance of continuous adult supervision for children near the pool.
Discourages rough play due to slippery surfaces when wet.
Requires adequate lighting for safe pool use after dusk to judge depth.
Advises on preventing unauthorized access, especially by children, and fence recommendations.
Warns against consuming alcohol or drugs that impair judgment and reflexes.
Highlights the importance of proper filtration and chemical treatment for water safety.
Advises against walking on top ledges as they are not walkways and can be slippery.
Details requirements for pool covers, emphasizing tamperproof retainers and avoiding use by children.
Warns about electrical dangers, especially when wet, and advises against use during storms.
Mandates the availability of a safety rope with a flotation buoy and a rescue pole.
Provides instructions for safe handling and use of pool chemicals, warning against incorrect placement.
Recommends periodic checks for pool and ladder component damage and wear.
Instructs to use only original equipment manufactured parts and avoid modifications.
Guide to selecting an appropriate site and considering installation factors like local laws and site conditions.
Instructions for marking the pool's circular footprint on the ground using a string and spray.
Steps for clearing the marked area of sod, roots, stones, and debris using a rake.
Detailed guide on how to ensure the ground surface is perfectly level using a plank and level.
Optional guide for installing patio stones at the pool's base, ensuring they are level and flush.
Procedure for assembling the bottom wall channels and post bases in a circle.
Instructions for uncoiling and positioning the pool wall into the bottom rail, aligning openings.
Guidance on adjusting the wall's circular shape for proper fit by tapping bottom plates.
Steps for securely fastening the pool wall joints with screws and sealing them with tape.
Instructions for creating a cove at the base of the pool wall using sand or Styrofoam pieces.
Initial steps and precautions for installing the pool liner, including using a vacuum to remove air.
Guidance on unpacking, unfolding, warming, and positioning the liner smoothly in the pool base.
Specific instructions for installing an overlap type pool liner, including fastening and smoothing.
Specific instructions for installing a bead or snap bead liner using a beaded liner track.
Specific instructions for installing a hung, J-bead, or V-bead liner by hanging the bead on the wall.
Procedure for attaching brackets to the uprights, ensuring correct alignment and screws.
Steps for inserting and securing the uprights into the bottom joining plates.
Instructions for connecting stabilizers and securing top plates to the uprights.
Procedure for positioning and attaching the top ledges to the uprights, ensuring alignment.
Installing the top ledge specific to the skimmer and water return hole locations.
Steps for installing the outer upright component onto the middle bracket.
Procedure for attaching the decorative ledge covers to the frame, securing them with screws.
Final steps for filling the pool with water, removing creases, and installing accessories.
To Next Page