How to fix Aquabot Vacuum Cleaner that moves slowly?
If your Aquabot Vacuum Cleaner is moving slowly or not vacuuming, ensure that the filter baskets are thoroughly clean and check that the suction ports are not clogged or blocked.
What to do if Aquabot BREEZE XLS is stuck in the middle of the pool?
If your Aquabot Vacuum Cleaner is stuck in the middle of the pool but still pumps out water, check to ensure that nothing is obstructing the cleaner or that it is not stuck on any loose objects in the pool.
How to make Aquabot BREEZE XLS Vacuum Cleaner clean the entire pool?
To resolve the issue of your Aquabot Vacuum Cleaner moving in the same area and not cleaning other areas, change the axle set up by adjusting the slider to move the cleaner in a different direction. Also, check your slider configuration.
How to untangle the floating cable of Aquabot BREEZE XLS?
If the floating cable of your Aquabot Vacuum Cleaner is getting tangled, change the axle set-up because the unit is most likely turning too sharply. You can also use the E-Z Swivel to straighten out the cable.
What to do if all LED lights are blinking on Aquabot BREEZE XLS?
If all LED lights are blinking on the power supply of your Aquabot Vacuum Cleaner, check to see if the unit is out of water or if the propellers are stuck. To restart, press the power button once, and the cleaning program will resume from where it left off.
Setting up the power supply is simple. Ensure it is plugged into a GFCI outlet and connect the floating cable.
Options for pool size settings: SMALL POOL for 1 Hour Shut-off, LARGE POOL for 2 Hour Shut-off.
Your cleaner moves about your pool by way of an adjustable axle controlled by a slider.
Use the E-Z Swivel to untangle the floating cable by walking away from the cleaner.
General| Type | Robotic Pool Cleaner |
|---|---|
| Power Source | Electric |
| Warranty | 2 years |
| Cable Length | 60 feet |
| Cable Length (alternate) | 60 feet |
To Next Page