Need help?Do you have a question about the Aquabot POOL ROVER SERIES 2 and is the answer not in the manual?
General| Type | Robotic |
|---|---|
| Filter Type | Cartridge filter |
| Power Supply | 24V DC |
| Weight | 16.5 lbs |
| Pool Type | In-ground |
| Warranty | 2 years |
| Filtration | Fine |
Do not operate while people swim or turn on unless in water. Keep power supply away from pool edge.
Connect to RCD (30mA) and unplug before maintenance to prevent shock.
Simple setup involving GFCI outlet and connecting floating cable to the power supply.
Select between Small Pool (1 Hour) and Large Pool (2 Hour) settings for cleaning duration.
Pins on the axle affect turning width. Adjust for optimal pool coverage and prevent cable tangling.
Use the E-Z Swivel to untangle the floating cable by walking away from the cleaner.
Securely re-install clean filter bags, ensuring the elastic opening covers the entire opening.
Filter bags are machine washable. Rinse debris and wash in cold water.
Adjust suction ports using a screwdriver to maximize debris pickup strength.
This brush agitates debris on the pool floor to aid vacuuming, do not remove it.
Provides solutions for issues like slow movement, blinking lights, coiled cable, and poor suction.
Addresses issues where the cleaner moves slowly, gets stuck, or doesn't cover the entire pool.
To Next Page