EasyManua.ls Logo

AquaLabo Ponsel CTZN User Manual

AquaLabo Ponsel CTZN
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Version 1.0
Update: August 2018
AQUALABO
90 Rue du professeur P. Milliez
94506 Champigny-sur-Marne, FRANCE
Tel.: +33(0)1 55 09 10 10
CTZN NUMERICAL SENSOR
User manual
Question and Answer IconNeed help?

Do you have a question about the AquaLabo Ponsel CTZN and is the answer not in the manual?

AquaLabo Ponsel CTZN Specifications

General IconGeneral
BrandAquaLabo
ModelPonsel CTZN
CategoryAccessories
LanguageEnglish

Summary

1. General Information

Assembly and Activation Safety

Guidelines for assembly, electrical connection, activation, operation, and maintenance by specialist personnel.

Sensor Body Marking

Information on the serial number and CE mark located on the sensor body for traceability and compliance.

2. Product Characteristics

Technical Characteristics Details

Detailed technical specifications including measures, sensor dimensions, material, pressure, connection, and communication.

CE Compliance Declaration

Declaration of compliance with European standards for electromagnetic compatibility and emission/immunity tests.

Measurement Process Identification

Components of the measurement process: one probe and Ponsel's cable.

3. Product Description

Product Overview and Advantages

Explanation of the inductive method, sensor advantages, and features like preamplifier, digital signal processing, and log book.

Sensor Applications

Typical areas of application for the compact and robust sensor, including wastewater, industrial effluent, and fish farming.

Construction and Dimensions

Detailed description and illustration of the sensor's construction, identifying key components like NTC sensor and EPDM head.

3.4 Communication Protocols

Modbus RTU Registers and Functions

Information on the Modbus RTU protocol, required documents, and available functions for sensor communication and calibration.

4. Installation and Connections

Sensor Installation Options

Advice on using accessories for immersion or in-pipe installation, emphasizing proper sensor suspension.

Immersion Installation Accessories

Details on accessories for immersion, including range or pole options and setup planning considerations.

PVC Pipe Mounting Accessories

Instructions and considerations for mounting the sensor using PVC pipe adapters and T-fittings.

Stainless Steel Pipe Mounting Accessories

Details on accessories for stainless steel pipe mounting, including adapters, clamps, and nipples.

Electrical Connections and Wiring

Guidance on sensor wiring, power supply requirements, and consumption for different cable lengths.

5. Startup and Maintenance

Initial Startup Procedure

Steps for initial startup after sensor connection, parameterization, and temperature stabilization.

Conductivity Sensor Calibration

Procedure for calibrating the conductivity sensor in two steps: offset (air) and gain (buffer solution).

Sensor Maintenance Guidelines

Information on sensor maintenance, emphasizing checking that the central part is not blocked.