To Next PageTo Next Page
Need help?Do you have a question about the Aquaread Aquaprobe AP-800 and is the answer not in the manual?
General| Model | Aquaread Aquaprobe AP-800 |
|---|---|
| Category | Measuring Instruments |
| Temperature Accuracy | ±0.1 °C |
| Conductivity Range | 0 to 200 mS/cm |
| Conductivity Accuracy | ±1% of reading |
| pH Range | 0 to 14 pH |
| ORP Range | -999 to +999 mV |
| Dissolved Oxygen Accuracy | ±1% of reading |
| Depth Range | 0 to 100 m |
| Ammonium Range | 0 to 100 mg/L |
| Chloride Range | 0 to 1000 mg/L |
| Nitrate Range | 0 to 100 mg/L |
| IP Rating | IP68 |
| Measurement Parameters | pH, ORP, Conductivity, Dissolved Oxygen, Turbidity, Depth, Ammonium, Chloride, Nitrate, Calcium |
| Temperature Range | -5 to 50 °C |
| Dissolved Oxygen Range | 0 to 20 mg/L |
| Power Supply | Rechargeable battery |
| Communication Interface | Bluetooth, USB |
| Memory | Internal memory for data storage |
