facebook.com/aquascapeinc
youtube.com/aquascape4
pinterest.com/aquascapeinc
instagram.com/aquascape_inc
For more information about our company or products, please visit our website at
aquascapeinc.com or call us at US (866) 877-6637 CAN (866) 766-3426
©2022 Aquascape, Inc. • All Worldwide Rights Reserved 11/29/22
INSTALLATION INSTRUCTIONS
Installation
Submersible Pond Filter
Item #95110
SUBMERSIBLE
POND FILTER
No. Description
1. Pump Cage
2. Submersible Pond Filter Foam (#95112)
3. Submersible Pond Filter Biological Filter Media (#95111)
4. Multi-Hose Adapters (3)
Contents
• Thread the multi-hose adapter into
the intake of the Submersible Pond
Filter. Do not use tools to attach the
fittings; fittings need to be hand-
tightened only (Ex. 1).
• Remove the filter media from all
packaging, and rinse thoroughly
to remove dust created during
transport.
• Once rinsed, place filter media into
the filter (Ex. 2) and secure the lid.
• Water pump
– This filter is compatible with pumps up to 1,250 GPH/ 4 731 L. The
Aquascape Ultra 1100 Water Pump (#91008) is recommended for
ideal water flow and filtration.
– Connect a section of tubing (not included) from the filter to the intake
of a compatible pump (not included) (Ex. 3).
NOTE: (2) multi hose adapters
are included for attachment to
the pump intake: 3/4" MPT and
5/8" MPT (Ex. 4).
– Discharge from the pump can be
used to feed a waterfall, fountain,
or simply used for circulation.
• Place the pump and submersible
filter into the pond (Ex. 5).
Ex. 2
Ex. 1
Ex. 5
Ex. 3
2
• Plug the pump into an external
GFI-rated electrical outlet and enjoy
(Ex. 6).
Ex. 6
3 4
1
General Maintenance
• Inspect your filter on a regular basis to make sure it is functioning
properly. If water flow is reduced, it may be due to excess debris
captured in the filter media.
• It is recommended to clean the filter as needed. Start by removing large
debris from the outside of the filter, then unlatch the blue clips and lift the
top to expose the media. Rinse the sponge and ceramic media in clean
pond water and remove any remaining debris from the filter cage.
• Once clean, replace the filter media and reconnect the filter.
Ex. 4
5/8" MPT 3/4" MPT
To Next Page
Need help?
General
