AquaScape AQUAFORCE 5200 - Attaching Fittings and Tubing; Winter Operation as Bubbler

AQUAFORCE
®
PUMP SPECS
Model Number 1000 2700 5200
Item Number #91011 #91012 #91013
Average Pond Size Recommendation 2000 US gallons 5400 US gallons 10,400 US gallons
Maximum Flow Rate 1070 GPH 2695 GPH 5284 GPH
Maximum Head Height 10 ft 14.1 ft 23.62 ft
Motor Type Asynchronous Asynchronous Asynchronous
Wattage 55 147 360
Amperage .51 1.25 3
Power Cord Length 25 ft 25 ft 25 ft
Discharge Hose Diameter 1”, 1.25”, 1.5”, 2” 1”, 1.25”, 1.5”, 2” 1”, 1.25”, 1.5”, 2”
Warranty 3 Year Limited 3 Year Limited 3 Year Limited
5
www.aquascapeinc.com
|
☎
CAN 1-866-766-3426
|
☎
US 1-866-877-6637
TYPICAL INSTALLATION IN AN
ECOSYSTEM WATER GARDEN
• The AquaForce
®
Pump is designed to
be submerged directly into the pond. To
maximize pond circulation, locate the
AquaForce
®
pump as far away as possible
from the location of the water entering
back into the water feature.
• It is recommended
that the pump NOT
be positioned in the
deepest area of the
pond. This will protect
the fish by preventing the
pond from completely
draining in the case of
leak in the plumbing or
filter. Bricks or stones can
be used, if needed, to
raise the pump up off the
bottom of the pond.
• The AquaForce
®
includes a wide assortment of fittings to
choose from. Select the appropriate fitting(s) needed for
your application.
• The threaded collar, on all of the ttings, enables the
AquaForce
®
pump to be installed and removed without the
need for any tools. Do not use tools to attach the fittings onto
the pump discharge. Fittings need to be hand-tight only.
• The extremely versatile Rotational Ball Outlet provides
you the ability to adjust the pump discharge to the perfect
position that your water feature set-up requires. Loosening
the threaded collar allows you to rotate the upper half of the
ball. A flat rubber washer seal is included to ensure a hand-
tight and leak-free connection. Make sure the flat rubber
washer is in place before installing the fittings.
• Install the right-
sized Multi-Hose
Adapter, based
on the diameter of
the tubing you are
using.
Threaded Collar