To Next PageTo Next Page
Need help?Do you have a question about the AquaTools AT84100 and is the answer not in the manual?
General| Brand | AquaTools |
|---|---|
| Model | AT84100 |
| Category | Swimming Pool Filter |
| Language | English |
Defines signal words like DANGER, WARNING, CAUTION, and NOTICE used in the manual.
Read and follow all safety instructions in the manual and on equipment.
Details risks associated with pressure and explosion, and pre-testing safety checks.
Covers initial pool cleaning, water return, and maximum operating pressure limits.
Guidance on cleaning intervals based on pressure gauge readings and flow reduction.
Section to record serial number, dealer details, purchase and installation dates.
Specifies conditions for filter placement: weather protection, access, ventilation, and level surface.
Covers plumbing codes, material usage, pipe support, and leak prevention.
Recommendations for installing isolation valves and heater connections for proper function.
Ensures filter grounding and bonding meets local and national electrical code standards.
Step-by-step guide for filling the pump, purging air, and starting the filter operation.
Instructions for ensuring the Safe-Lok ring is properly secured to prevent leaks.
Reminds users to record the filter pressure gauge reading after initial startup.
Ensure pump is stopped, valves closed, and pressure released before disassembly.
Steps to remove drain plug, ring, shells, and O-ring for filter maintenance.
Inspect and replace the safety latch for the Safe-Lok ring if damaged.
Steps to clean, install O-ring, push shells together, and securely latch the filter.
Clean module when pressure rises 10 psi above startup pressure.
Isolate filter, rinse thoroughly, avoid mixing chemicals, and follow safety guidelines.
Sponge/spray module, soak if needed, rinse, drain tank, and reassemble.
Wash exterior, check bleed valve, and avoid solvents for filter maintenance.
Check skimmer, trap basket, pump leaks, and filter pressure for maintenance.
Protect filter from freezing to prevent damage and voiding the warranty.
Includes cleaning, draining system, disassembling filter, and storing module.
Addresses low chlorine, high flow rate, small filter, dirty module, and chemical imbalance.
Identifies causes like plugged elements, blocked pipes, or small filter area.
Troubleshoots issues related to undersized pumps or plugged pump traps.
Diagnoses causes for a plugged filter module and suggests solutions.
Covers issues like low chlorine, torn module, inadequate turnover, or incorrect installation.
Troubleshooting for accessories not functioning, possibly due to filter performance.
Details warranty periods for tanks, components, and pumps for various filter types.
Lists conditions that void the warranty, such as negligence or improper installation.
Instructions for completing and mailing the warranty registration card.
