EasyManua.ls Logo

AQUAvalve easy2GO Kit - easy2 GO Kit Assembly and Connections; Assembly Instructions Overview; Connecting to a Plastic Container; Connecting to a Reservoir Tap

Default Icon
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Assembly instructions
Cut 9mm pipe to appropriate
length if required.
5
1
For ease of assembly lay out the contents of your easy2GO kit.
Then place your flat tray into position.
Minimum recommended tray depth is 30mm.
Maximum tray size 1.2m/sq.
Ensure your tray is level.
3
Place AQUAvalve cover over the AQUAvalve.
The AQUAvalve and cover should be placed
directly onto the tray.
Never sit the AQUAvalve and cover on
capilliary matting.
7
Connecting to a reservoir tap.
Connect 9mm pipe to the 16-9mm Click Fit
Adapter and Filter
Connect the 16-9mm Click Fit Adapter and Filter
to your reservoir tap
Allow your plants to establish for 2-8 weeks
before switching on
Connection Option 2
Note: The easy2GO kit can be placed anywhre in the tray
2
Remove threaded collar from AQUAvalve.
Push one end of the 9mm pipe through
the collar and attach the pipe to
AQUAvalve nozzle.
Rescrew the AQUAvalve collar - DON’T
overturn... when you feel it grip STOP
4
Ensure the circular spirit level indicates the
tray is level, adjust if required.
Place plant pots into tray.
6
Connecting your easy2GO Kit to a simple
plastic container.
Drill a hole into the side of the container,
25mm from the base. Use a 3-5mm drill bit to
create a pilot hole and a 12.5mm drill bit for
the final hole.
Insert 9mm Top Hat Grommet into 12.5mm
hole, push 9mm pipe through the Grommet
and push 9mm filter into 9mm pipe.
Connection Option 1
8
Fill reservoir with water and
add liquid feed if required.
Reservoir
1x AQUAvalve5
1x AQUAvalve cover
1x circular spirit level
1x 16-9mm Click Fit
Adapter and Filter
1x 9mm golf filter 1x 9mm top hat grommet 1 x 1.5m 9mm pipe
Using 9mm golf filter
Using 16-9mm inline filter
and standard hosepipe
Minimum pot size 10 litres
(if placed directly in tray)*
Minimum tray depth 30mm
Maximum tray size 1.2m/sq
easy2GO contents
Suggested layouts
Reservoir
9mm pipe
9mm top hat grommet
16mm pipe
9mm golf filter
16-9mm Click Fit
Adapter and Filter
AQUAvalve5
* Smaller pots may be used if a 25mm
gravel bed is created in the tray