1. Check air pump for any signs of shipping damage. If damaged, do not operate and
return to place of purchase.
2. Place Air Pump on flat surface near aquarium.
3. Connect one end of the airline tubing (sold separately) to air outlet valves on the
back of the unit, then secure tubing with braces, connect the other end of the airline
tubing to décor. (Please note: For the 60G and 100G units, TWO separate airline
tubes should be attached, simply repeat the step above.)
4. Be sure that the cord makes a “drip loop” to prevent water from running down and
into the air pump plug or receptacle.
5. Plug in air pump.
To maintain efficient performance of the Air Pump, replacing worn internal rubber
diaphragms, check valve(s) and dirty filter pads (sold separately in repair/replacement kits)
is recommended.
Installation Instructions
Maintenance
Model Aqueon
®
Recommended
Number Air Pumps Aquarium Size Wattage Voltage
06995 Model 10 2-10 gallon 1.5 W 120V/60Hz
06996 Model 20 11-20 gallon 1.7 W 120V/60Hz
06997 Model 40 40 gallon and under 2.8 W 120V/60Hz
06998 Model 60 60 gallon and under 3.2 W 120V/60Hz
06999 Model 100 100 gallon and under 3.8 W 120V/60Hz
Product Specifications
Kits Includes
Aqueon
®
QuietFlow
®
Check
Air Pump Model Size Valve(s) Filter Diaphragms
Model 10 1 1 1
Model 20 1 1 1
Model 40 1 1 1
Model 60 2 1 2
Model 100 2 1 2
Diaphragms
Filter
Check Valve
Buy quality fish supplies in our online store.
To Previous Page
Loading...