Aradex VECTOPOWER VP600 Series

Need help?

Do you have a question about the Aradex VECTOPOWER VP600 Series and is the answer not in the manual?

Summary

2 Safety Information

2.1 Explanation of Safety Signals

Explains signal words (DANGER, WARNING, CAUTION) and warning signs.

2.2 Instruction Notices and Precautions

Covers handling, disconnect rules, moisture protection, and electrical safety.

2.3 Specific Hazard Warnings and Precautions

Details dangers from electricity, hot surfaces, residual voltage, and ESD.

3 Technical Data

3.2 Dimensional Drawings and Dimensions

3.2.1 VP600-18 Wxx0-61.x.xx.xx.xx Device Details

3.2.2 VP600-18 Xxx0-21.x.xx.xx.xx Device Details

3.2.3 VP600-18 Wxxx-6 A;6 C.x.xx.xx.xx Device Details

3.2.4 VP600-28 Wxxx-6 A.x.xx.xx.xx Device Details

3.5 Power Supply Details

Covers logic and high voltage/DC link power supply.

3.5.1 Logic Power Supply

Details logic supply voltage, current consumption, and protection.

3.5.2 High Voltage; DC Link Power Supply

Covers DC link power supply, internal capacitance, and safety.

3.6 Grounding and Insulation Protection

Explains grounding requirements and insulation monitoring.

3.7 Interface and Connector Information

3.7.1 Connectors by Device Type

3.7.2 ST1 23-pin Connector Details

Covers connector type and pin assignments for ST1.

3.7.3 ST2, ST3, ST4 Logic Signal Connectors

3.7.4 ST4 Voltage Measurement Connectors

3.7.5 Possible Functions Overview

3.7.5.2 Incremental Encoder Function Blocks

Details functions for incremental encoder inputs.

3.7.5.3 Incremental Encoder Function Block 2

Details functions for incremental encoder input 2.

3.7.5.4 Resolver 1 Function Block

3.7.5.5 Resolver 2 Function Block

3.7.5.7 RS-232 Function Block

3.7.5.8 USB Function Block

3.7.5.9 CAN Bus Function Block

3.7.6 Screw Fittings and Connections

5 Required Connections (Minimum Configuration)

5.1 Operation with Incremental Encoder

Explains connections for operating with an incremental encoder.

5.2 Sensorless Operation

Explains connections for sensorless operation.

6 Installation

6.1 Mechanical Assembly and Mounting

6.2 Distances from Neighboring Components

Explains minimum distances and warns about hot surfaces.

6.3 Safety Information During Installation

Cautions about repairs and opening the device.

6.4 DC Link and Motor Phase Connection

Covers all aspects of DC link and motor phase connection procedures.

6.5 Direction of Installation

6.5.1 VP600-xxXxxx Installation Direction

6.6 Electrical Connection Procedures

Details general electrical connection requirements and safety.

6.7 CAN Bus Communication

6.7.1 Connecting Multiple VECTOPOWER Devices

6.8 VECTOBUS Communication

6.8.1 VECTOPOWER to VECTONUM Connection

7 Commissioning

7.1 Visual Inspection Before Commissioning

Lists items for visual inspection before commissioning.

7.2 Requirements for Commissioning

Outlines requirements for commissioning the control system.

8 Scope of Functions of Standard Firmware

8.3 Motor Inverter Operating Modes

8.4 Protective Functions Overview

Provides an overview of protective functions.

8.4.1 Overtemperature and Voltage Protection

Covers power electronics overtemp and LV/HV supply voltage monitoring.

8.4.3 Motor and Overcurrent Protection

Covers motor overtemp, overcurrent, short circuit, and sum current protection.

8.4.5 Thermal Current Limitation

Explains limiting current to prevent thermal overload.

8.4.6 Hardware Enable

10 Electromagnetic Compatibility (EMC)

10.1 Shielded Cables for EMC

10.2 DC Link EMC Measures

11 Switch-off, Disassembly, and Disposal

11.1 Switching Off the VECTOPOWER Device

Provides steps for safely switching off the device.

11.2 Dismantling the VECTOPOWER Device