Sends music and sounds wirelessly from a computer
to supported Arcam products.
PC, Mac & Linux compatible
Use with iTunes, Windows Media Player, BBC iPlayer,
YouTube and other applications that output sound.
Initial Setup:
1. Insert USB device into computer
2. Wait for automatic installation
3. Press ‘Associate’ button on USB device. The LED
will ash to indicate associaton mode is active
4. Activate association mode on receiving
product(s) (e.g. rDAC, rCube) — see product
handbook for further details
5. When association is complete, launch media
player software and play songs. Association is
only required the rst time that the transmitter
is used with a particular receiver product. The
device must always be inserted before starting
media player software, web browser etc.
Problems or questions?
Please contact your dealer. If your Arcam dealer
is unable to answer any query regarding this or
any other Arcam product please contact Arcam
Customer Support at the address below.
support@arcam.co.uk
Customer Support department
ARCAM
Pembroke Avenue
Waterbeach
Cambridge
CB25 9QR
http://www.arcam.co.uk
E990PK_C
To Previous Page
Loading...