Arcam Solo movie 2.1 - Network and USB Operation; Playing Media Files via MY MEDIA

E-26
Playing media files
The MY MEDIA icon is shown on screen
when the Solo is first switched on. To
play video, image files (e.g. photographic
slideshows) or audio files, highlight the
MY MEDIA icon and press OK.
Video and audio files can be played from
the uPnP Network, USB media or CD-R/
RW discs. For a list of supported audio and
video file formats, see “disc & file formats”
on page E-16
To play media files, insert the USB device
or data disc into the player. The MY MEDIA
menu is displayed with music, video and/
or picture file symbols:
To play all available files without making
any selection, press
<
to go to the Play
menu, described below.
To select particular files, use the
'
/
,
cursor keys on the remote control to
highlight the media device to navigate
the MY MEDIA menu. Press OK to select
the media device and display the file and
folder contents.
NOTE
When there are no playable files or
folders within the selected media or
folder, ‘Empty’ is displayed.
You can play a single file or playlist
(containing up to 100 selected files). Use
the
'
/
,
cursor keys on the remote
control to highlight a file or playlist and
press OK to select it. The
7
and
8
keys
can be used to skip one page up or down.
The
9
and
:
keys can be used to skip 10
pages up or down.
Play a music file
Use the
'
/
,
cursor keys to highlight
a music file and press OK or
4
to start
playback.
Play a video file
Use the
'
/
,
cursor keys to highlight
a video file and press OK or
4
to start
playback. Press DISPLAY to view relevant
video file playback information.
Rapid playback
Press
7
or
8
during playback to activate
rapid reverse or forward playback. Further
button presses change the playback
speed. Speeds of 2x, 4x, 8x, 16x and 32x
normal speed are available. Press
4
to
resume normal playback.
MusicLife App
MusicLife enables you to control your Solo
product from your iOS device.
It can be used to stream music to your
product from a UPnP server such as a NAS
drive, or music stored locally on the iOS
device.
Additionally, the app features a remote
control interface, which contains the most
common features of the infrared remote
control, as well as useful information
such as the current input, volume, audio
decoder and the units IP address
NOTE
The Solo will need to have the “Network
Media” option enabled. For instructions
on how to do this, please refer to
“System” on page E-32.
Minimum OS requirements for the app: iOS 7
Downloading the app
Download the app from the App Store
SM
.
For your convenience, you can scan the
following QR code into your phone to
download the app.
network/usb
operation
App displays the status of the Solo
Display shows basic information such as input,
volume, audio decoder, unit IP address.