Arcam Solo movie 2.1 - Technical Specifications (Solo movie 2.1; Solo music); Power Output and Audio Specs; Video and Digital Interface Specs

E-37
English
Continuous power output, per channel
2 channels driven, 1kHz, 0.2% THD (8Ω/4Ω) 80W/125W
Residual noise & hum (A-wtd) 300µV
Stereo line inputs
Maximum input 2.1V rms
Input impedance 10kΩ
Signal/noise ratio (A-wtd ref 100W) 90dB
Frequency response 20Hz—20kHz ± 0.1dB
Headphone output
Maximum output level into 32Ω 2.5Vrms
Output impedance 1Ω
Video
HDMI In/Out supported formats 4K2K (24/30Hz), 1080p (50/60Hz), 1080i (50/60Hz),
720p (50/60Hz), 480p/576p, 480i/576i
Digital interfaces
USB USB 2.0 High Speed (480 Mbit/s)
Network 10 BASE-T / 100 BASE-TX
S/PDIF Optical 44.1kHz, 48kHz, 88.2kHz, 96kHz
S/PDIF Coaxial 44.1kHz, 48kHz, 88.2kHz, 96kHz, 192kHz
Bluetooth SBC, AAC, aptX, aptX-LL
General
Mains voltage 110–120V or 220–240V, 50 –60Hz
Power consumption (maximum) 1kW (Thermal dissipation approx. 3400 BTU/hour)
Power consumption (idle, typical) 60W (Thermal dissipation approx. 200 BTU/hour)
Power consumption (standby) <0.5W
Dimensions (W x D x H) 420 x 414 x 90mm
Weight (net) 11.5kg
Weight (packed) 15.0kg
Supplied accessories Mains lead
Remote control
2 x AAA batteries
User manual
DAB/FM aerial
Bluetooth antenna
Wi-Fi antenna
E&OE
NOTE: All specification values are typical unless otherwise stated
Solo movie 2.1 / Solo music