archgon MD-3107-U3 - Product Overview; Before Use; Mac User Instructions; System Requirements

Product MD-3107-U3 Blu-ray Optical Drive
Thank you for purchasing External Blu-ray Drive from archgon. Please read following instructions
carefully and note all Cautions and Warnings.
BEFORE USE
Please confirm the drive type in your hand. It can be identified by the retail package.
CD
DVD
Blu-ray
Read
Write
Read
Write
Read
Write
Combo
V
V
V
V
V
X
Writer
V
V
V
V
V
V
Note：The external drive is compatible with both PC and Mac.
Install authorized Blu-ray software before reading or writing to a BD media.
For Mac users,
1. Please purchase and download appropriate Blu-ray playback software for Mac OS.
2. The external drive will be not detected if without inserting a disk.
3. Eject button function may be not work under Mac OS. Please click the eject icon from playback.
SYSTEM REQUIREMENT
Windows XP, Vista, 7, 8 or higher
Mac OS 10.5 or higher
INSTALLATION
1. Power on the PC/Laptop.
2. Plug the USB 3.0 micro B type connector to the back of the drive.
3. Connect the Type-A connector(s) to USB port(s) on the PC/Laptop.
4. Once properly connected, you will see the new drive under “My Computer”. The device will be
ready to use without further setup.
Note：Connect fat cable to PC/Laptop as the major power. In some cases, the thinner one maybe
required to connect to the computer as well.
archgon