Connected Scale
How do I pair my Connected Scale with my Smart
Device?
To pair your Connected Scale with your smart device you first of all need to launch
the ARCHOS Connected Self application and press the settings button.
In the section dedicated to objects in your account press the button then the
button to start pairing.
Once the pairing system has started on the application, you need to start the
pairing on the Connected Scale. To do this press and hold the button on the
underside of the Connected Scale for 6 seconds until the following logo is shown on
the Connected Scales's screen.
You smart device should now detect the Connected Scale. If it doesn't press the
to start the pairing process again.
Then press the Connected Scale to pair the Connected Scale with the device, then
wait until the pairing process has finished. If the pairing process fails, "E1" will be
shown on the Connected Scale's screen, you should then restart the pairing
procedure.
Page 1 / 2
(c) 2021 ARCHOS <noreply@archos.com> | 2021-09-17 16:31
URL: http://faq.archos.com//index.php?action=artikel&cat=132&id=179&artlang=en
To Next Page
Need help?
General