Need help?Do you have a question about the Arctic Cat 2015 ZR 8000 and is the answer not in the manual?
General| Brand | Arctic Cat |
|---|---|
| Model | 2015 ZR 8000 |
| Category | Snowmobiles |
| Language | English |
Explains the exclusion of implied warranties of merchantability and fitness for purpose.
Provides safety advice and warnings for operating the snowmobile.
Advises on using genuine parts and accessories for maintenance and repairs.
Presents essential safety rules for operating a snowmobile, illustrated with icons and text.
Details the Vehicle Identification Number (VIN) and Engine Serial Number (ESN) for identification.
Shows the typical locations of controls on ZR/XF and M models.
Specifies the recommended octane and ethanol content for gasoline.
Identifies the recommended oil for the oil-injection system.
Provides instructions and warnings for filling the gas tank safely and correctly.
Explains the required break-in period for new or rebuilt Arctic Cat engines.
Describes the procedure and benefits of breaking in a new drive belt.
Explains the various indicators and icons on the speedometer/tachometer.
Details how to use and reset the odometer, trip meters, hour meter, and clock.
Explains the function and meaning of the service icon.
Describes the coolant temperature warning icon and its behavior.
Explains the low oil warning icon and necessary actions.
Details how to use and reset the odometer, trip meters, and hour meter.
Explains how to set the clock and calibrate the altimeter.
Details the coolant temperature warning icon and required actions.
Explains the low oil warning icon and the importance of checking oil levels.
Explains how to cycle through and set RPM, speed, clock, and altimeter displays.
Details how diagnostic codes are activated and what to do if one appears.
Lists diagnostic trouble codes for the 6000 series and their corresponding troubles.
Provides instructions on how to adjust the handlebar tilt on ZR/XF models.
Details how to adjust the handlebar height and tilt on M models.
Explains how to adjust the angle of the speedometer/tachometer for 8000 models.
Covers inspection and maintenance of the closed liquid cooling system.
Emphasizes battery maintenance for peak performance and service life.
Provides detailed safety precautions and steps for jump-starting a snowmobile.
Discusses cleaning and periodic inspection of the drive and driven clutches.
Explains the importance of drive clutch/driven clutch alignment and when to check it.
Details how to inspect rebuildable gas shock absorbers for leaks or damage.
Provides guidance and warnings regarding track stud installation.
Explains the engine reverse function and its proper usage.
Provides the step-by-step procedure for shifting into reverse safely.
Covers the essential steps and safety checks for starting and stopping the engine.
Details procedures for cold starts, flooding, and engine shutdown.
Introduces the hydraulic brake system and important operational considerations.
Discusses maintaining brake fluid levels and checking brake lever travel.
Lists various methods for emergency stopping and their effectiveness.
Explains how altitude affects snowmobile performance and the need for adjustments.
Details how to check and add lubricant to the chain case.
Explains how to remove and install the in-line fuel filter for 6000 models.
Details how to check and add engine oil for 6000 models.
Explains how to check and fill the coolant level in the expansion tank.
Covers using recommended spark plugs and understanding heat range.
Provides the procedure for checking and adjusting the APV cables.
Details the procedure for removing and charging the electric start battery.
Explains how to locate and check fuses and replace a blown fuse.
Provides a chart for charging a battery using a constant-current charger.
Details how to check and add brake fluid to the reservoir.
Explains how to check the brake lever travel before each use.
Details the procedure for bleeding the brake system if the lever feels spongy.
Explains how to check and change brake pads.
Describes the process of burnishing new brake pads for optimal effectiveness.
Discusses the drive belt's function and the importance of periodic checks.
Details how to check and adjust the drive belt deflection for optimal performance.
Provides instructions for removing and installing the drive belt.
Explains how to check the track tension for proper snowmobile performance.
Describes how to check the track alignment for proper operation.
Details how to adjust the front ski shock spring preload.
Provides guidance on adjusting Fox air shocks for Sno Pro models.
Details how to adjust the skid frame front arm shock spring tension and limiter straps.
Explains how to adjust the rear spring pre-load for ZR models using cam positions.
Details how to adjust the rear arm shock spring pre-load for M/XF models.
Mentions checking bulb types and replacing headlight/taillight bulbs.
Explains how to adjust the vertical aim of the headlight beam.
Describes the purpose of ski wear bars and when to check/replace them.
Explains how to adjust the ski stance, including legal regulations.
Advises on checking and replacing rail wear strips to prevent track damage.
Discusses the importance of the drive belt fit and condition for performance.
Details how to check and adjust drive belt deflection for optimal performance.
Emphasizes keeping drive and driven clutches clean.
Explains how to check the drive clutch/driven clutch offset.
Outlines Arctic Cat's warranty for U.S. EPA-certified snowmobiles and its duration.
Lists warranty covered parts and owner's maintenance duties.
To Next Page
