Features of remote control(continued)
RESET Button: When you press the recessed RESET button,
all current settings are cancelled and the control will return to
its initial settings.
FAN Button: Used to select the Fan Speed in four steps-
AUTO、LOW 、MED (on some models only) or HIGH. Each
time the button is pressed, the fan speed mode is shifted.
temperature setting or to adjust the TIMER in a counter-clockwise
direction.
NOTE: Press and hold and buttons together for 3 seconds
to alternate the temperature display between the C & F scale.
TIMER Button: This button is used to preset the time ON
(start to operate) and the time OFF (turn off the operation).
LOCK Button: When you press the LOCK button, all current
settings are locked in and the remote controller does not accept
any operation except that of the LOCK. Press again to cancel
the LOCK mode.
CANCEL Button:
(a). If the TIMER ON, TIMER ON OFF or TIMER OFF ON
feature has been set, pressing the CANCEL button will override
the TIMER program and turn off the unit as well.
(b). When TIMER OFF has been set, pressing the CANCEL button
will cancel the timer off setting and turn on the unit (when
the unit is off).
(c). If no TIMER feature has been set, pressing the CANCEL button,
will have no effect.
CLOCK Button: Used to set the time.
LED Button: Press this button to clear the digit display in the
air conditioner, press it again to activate it .
SLEEP Button: In SLEEP mode,
pressing this button will activate or deactivate sleep function.
This function allows the unit to maintain the most comfortable
temperature and save energy. This function is available on
COOL or AUTO mode only. For more information, see
“Sleep operation” in “USER’s MANUAL”.
NOTE:
be cancelled if MODE, FAN SPEED or ON/OFF button is
pressed.
While the unit is running under SLEEP mode, it would
REMOTE CONTROL INSTRUCTIONS
17
6
5
7
9
8
10
11
4
To Next Page
Loading...
