This EXHAUTST CONTROL allows the air conditioner to either circulate air inside or vent air to
the outside.
Display:
Error Codes:
NOTE: The FAN ONLY mode will display LO or HI.
Operating Instructions
Additional Features you You Should Know
8
AUTO TIMER
● The COOL circuit has and automatic 3-minute starting time if the unit is turn OFF and ON quickly. This
prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run
during this time.
● The control can display the temperature in Fahrenheit or Celsius.
To convert from one to the other, press and hold the left and right TEMP/TIMER buttons at the same time
for 3 seconds.
The open position removes stale air from the room and vents it to the outside. Fresh air is drawn in
through normal openings in the home.
To Next Page
Loading...
