25
Remote Control Operating Instructions
TIMER Operation
Press the TIMER button to initiate the AUTO-START
and AUTO-STOP setting program of the unit.
The time can be set in a range of 0~24 hours.
To set the AUTO-START/AUTO-STOP Time.
1. Press the TIMER button. When TIMER ON indicator
is displayed on the LED window of the air conditioner,
it indicates that the AUTO-START setting program
is initiated. When the TIMER OFF indicator is displayed
on the LED window of the air conditioner, if indicates
that the AUTO-STOP setting program is initiated.
2. Press or hold the UP ( ) or DOWN( ) to change the
AUTO time in 0.5-hour increments, up to 10 hours,
then in 1-hour increments up to 24 hours. The control
will count down the remaining time until start/stop.
3. The selected time will register in 5 seconds and the air
conditioner will automatically revert back to display the
previous temperature setting.
4. Tuning the unit ON or OFF at any time will cancel the
AUTO-START/AUTO-STOP function.
NOTE: To cancel the TIMER setting, press the TIMER
button and press or hold the UP ( ) or DOWN ( )
until 0 hour is displayed on the air conditioner LED
window.
To Next Page
Loading...
