ARDES AR4B03 - Page 8

14
During use, rest the appliance on a at surface.
Do not use this heating appliance with programmers, timers, separate
remote control systems (di󰀨erent to the ones provided with the appliance)
or any other device that automatically turns on the appliance, as there is a
risk of re in the event the appliance is covered or positioned incorrectly.
Do not use the heater in presence of ammable substances (petrol,paints,
etc.).
Do not place the cord near sources of heat.
WARNING: DO NOT COVER THIS PRODUCT NEAR CURTAINS OR
OTHER COMBUSTIBLE MATERIAL.
WARNING: DO NOT COVER THE APPLIANCE OR OBSTRUCT THE
AIR INLETS TO AVOID OVERHEATING.
GB
Technical informations
1 - Function switch
2 - Support base.
Technical data indicated on the appliance.
Instructions for use
GB
SUPPORT BASE ASSEMBLY.
Before performing any assembly operation, make certain that the
appliance is switched o󰀨 and disconnected from the power outlet.
Assemble the two parts of the base as the below picture show.