6
When used with a 12 V power supply, pay attention not to frequently switch on/o the car engine,
so the refrigerator box is not constantly shut-o. If the appliance is used with the engine o, the car
engine could go at. The cover can be locked in the open position using the handle and hook on
the inner part of the cover.
Operation at 230V
During operation with a 230 V power supply, the
cooling capacity is controlled by a knob on the front
of the cover.
To switch on the appliance, turn the knob clockwise;
increasing the rotation of the knob, also increases the
cooling capacity.
ECO POSITION: the refrigerator consumes less
energy and complies with the parameters of eciency
class A++; the internal temperature reaches 8°C to
11°C less than the ambient temperature.
MAX POSITION: the appliance works at maximum
cooling capacity; the inside of the casing reaches up
to 17°C less than the ambient temperature.
Operation at 12 V
ATTENTION! The knob to adjust cooling capacity, on
the front of the cover, does not work during use at 12
V.
During operation with cooling at 12 V, the appliance
always produces a dierence in temperature
compared to the ambient temperature up to 17 ° C.
MAIntenAnce
Disconnect the plug from the socket and let the appliance cool down well before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
It is best to store the appliance with the lid open if it is not being used.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
To Next Page
Loading...
