10
voltage in the socket is the same as indicated
in the nameplate data. In the event that the
plug and socket are not compatible, have the
socket replaced with one of suitable type by
a qualied professional. Do not use adapters
or extension cords that do not comply with
the safety standards in force, or that exceed
the ow limits in current value. Disconnect
the appliance from the mains when not in
use and make sure it is turned o. Do not
pull the power cord or the appliance itself to
remove the plug from the socket.
The use of any electrical appliance requires
the observance of certain fundamental rules,
in particular: do not touch the appliance with
wet or damp hands; do not use the appliance
with bare feet; do not leave the appliance
exposed to atmospheric agents (rain, sun);
do not subject it to shocks.
If there is a fault or abnormality in the appliance,
immediately remove the plug, do not touch it
and contact an authorized service centre. If
you decide not to use this type of machine,
you should make it inoperative by cutting the
To Next Page
Loading...
