Arduino Nano User Manual

Learn more on the Desktop IDE
See this tutorial for a generic guide on the Arduino IDE with a few more infos on the
Preferences, the Board Manager, and the Library Manager.
Tutorials
Now that you have set up and programmed your Arduino Nano board, you may find
inspiration in our Project Hub tutorial platform.
For more details on the Arduino Nano, see the hardware page.
Last revision 2018/02/19 by SM
The text of the Arduino getting started guide is licensed under a Creative Commons
Attribution-ShareAlike 3.0 License. Code samples in the guide are released into the public
domain.

Arduino Nano Specifications

General

Microcontroller	ATmega328P
Operating Voltage	5V
Input Voltage (recommended)	7-12V
Input Voltage (limits)	6-20V
Digital I/O Pins	14 (of which 6 provide PWM output)
PWM Channels	6
Analog Input Channels	8
DC Current per I/O Pin	40 mA
Clock Speed	16 MHz
Dimensions	18 x 45 mm
Weight	7 g
Flash Memory	32 KB (of which 2 KB used by bootloader)
SRAM	2 KB
EEPROM	1 KB