Arduino NG

RemoteControl/TvRemote/TvRemote.ino
#include <IRremote.h>
Line 1
-
class TvRemote {
-
-
enum {
5
CMD_LEN = 32, GUIDE = 0xE0E0F20D,
-
POWER = 0xE0E040BF, TOOLS = 0xE0E0D22D,
-
SOURCE = 0xE0E0807F, INFO = 0xE0E0F807,
-
HDMI = 0xE0E0D12E, OPTIONS = 0xE0E016E9,
-
ONE = 0xE0E020DF, UP_K = 0xE0E006F9,
10
TWO = 0xE0E0A05F, LEFT_K = 0xE0E0A659,
-
THREE = 0xE0E0609F, RIGHT_K = 0xE0E046B9,
-
FOUR = 0xE0E010EF, DOWN_K = 0xE0E08679,
-
FIVE = 0xE0E0906F, RETURN = 0xE0E01AE5,
-
SIX = 0xE0E050AF, EXIT = 0xE0E0B44B,
15
SEVEN = 0xE0E030CF, A = 0xE0E036C9,
-
EIGHT = 0xE0E0B04F, B = 0xE0E028D7,
-
NINE = 0xE0E0708F, C = 0xE0E0A857,
-
TXT = 0xE0E034CB, D = 0xE0E06897,
-
ZERO = 0xE0E08877, PIP = 0xE0E004FB,
20
PRE_CH = 0xE0E0C837, SEARCH = 0xE0E0CE31,
-
VOL_UP = 0xE0E0E01F, DUAL = 0xE0E000FF,
-
VOL_DOWN = 0xE0E0D02F, USB_HUB = 0xE0E025DA,
-
MUTE = 0xE0E0F00F, P_SIZE = 0xE0E07C83,
-
CH_LIST = 0xE0E0D629, SUBTITLE = 0xE0E0A45B,
25
PROG_UP = 0xE0E048B7, REWIND = 0xE0E0A25D,
-
PROG_DOWN = 0xE0E008F7, PAUSE = 0xE0E052AD,
-
MENU = 0xE0E058A7, FORWARD = 0xE0E012ED,
-
SMART_TV = 0xE0E09E61, RECORD = 0xE0E0926D,
-
PLAY = 0xE0E0E21D, STOP = 0xE0E0629D
30
};
-
-
IRsend tv;
-
-
void send_command(const long command) {
35
tv.sendSAMSUNG(command, CMD_LEN);
-
}
-
-
public:
-
40
void guide() { send_command(GUIDE); }
-
void power() { send_command(POWER); }
-
void tools() { send_command(TOOLS); }
-
void source() { send_command(SOURCE); }
-
void info() { send_command(INFO); }
45
void hdmi() { send_command(HDMI); }
-
void zero() { send_command(ZERO); }
-
void one() { send_command(ONE); }
-
void two() { send_command(TWO); }
-
Chapter 12. Creating Your Own Universal Remote Control • 208
report erratum • discuss
www.it-ebooks.info