To Next PageTo Next PageHow to prevent electromagnetic interference in my Argo Air Conditioner?
Electromagnetic interference in your Argo Air Conditioner can be caused by the microcomputer and compressor's high-speed switching. To address this, use a separate power source for the A/C. Additionally, keep the A/C and its wiring at least 1 meter away from wireless devices and antenna cables.
What to do if the self-diagnostics function fails on my Argo Air Conditioner?
If the self-diagnostics function fails to operate on your Argo Air Conditioner, check the indoor unit and the power voltage. Also, check if the fuse is blown and replace the circuit board or the fuse if necessary.
General| Brand | Argo |
|---|---|
| Model | AWMI 28 AHL |
| Category | Air Conditioner |
| Language | English |
Specific warnings and advice for safe handling and installation procedures.
Technical details for the AWMI 28 AHL model, including performance and dimensions.
Technical details for the AWMI 36 AHL model, including performance and dimensions.
Technical details for the AWMI 50 AHL model, including performance and dimensions.
Technical details for the AWMI 70 AHL model, including performance and dimensions.
Component details for AWMI 28 AHL, AWMI 36 AHL, and AWMI 50 AHL indoor units.
Component details for the AWMI 70 AHL indoor unit, including PCB, fan, and motors.
Sensor resistance characteristics for various indoor unit models.
Detailed dimensions and drawings for the AWMI 28 AHL indoor unit.
Detailed dimensions and drawings for AWMI 36 AHL and AWMI 50 AHL indoor units.
Detailed dimensions and drawings for the AWMI 70 AHL indoor unit.
Diagram showing refrigerant flow for AWMI 28, 36, and 50 AHL models.
Diagram showing refrigerant flow for the AWMI 70 AHL model.
Air throw distance charts for AWMI 28 AHL in cooling and heating modes.
Air throw distance charts for AWMI 36 AHL in cooling and heating modes.
Air throw distance charts for AWMI 50 AHL in cooling and heating modes.
Air throw distance charts for AWMI 70 AHL in cooling and heating modes.
Wiring diagram and electrical details for the AWMI 28 AHL indoor unit.
Wiring diagrams and electrical details for AWMI 36 AHL and AWMI 50 AHL units.
Wiring diagram and electrical details for the AWMI 70 AHL indoor unit.
Advice on choosing an appropriate location for the indoor unit, avoiding hazards.
Procedures for connecting multiple indoor units to outdoor units.
Details on main unit controller functions and automatic/manual operation modes.
How the system adjusts for comfortable room environments using sensors.
Explanation of PWM and PAM control for improved inverter performance.
Explanation of the high power mode for increased output.
How the economy mode saves energy by adjusting temperature settings.
Details on overload, freeze prevention, and cold-air prevention mechanisms.
Safety measures to take before inspecting or repairing the unit.
Procedure for initiating and understanding the unit's self-diagnostic system.
Explains diagnostic codes and their corresponding malfunctions.
Steps to check communication and voltage between indoor and outdoor units.
Guidelines for electrical connections, wiring, and grounding.
General safety advice for using the air conditioner safely.
Instructions for setting fan speed to automatic or manual.
Explanation of the energy-saving ECONOMY mode for cooling and heating.
Steps to set the current time on the remote control.
Procedure to set the time for the unit to automatically turn off.
Procedure to set the time for the unit to automatically turn on.
How to set a daily repeating ON/OFF schedule for the unit.
How to adjust airflow horizontally using vertical vanes.
How to adjust airflow vertically using the flap.
How to activate the automatic flap movement for air sweep.
How to check, clean, and replace the anti-mold filter.
How to install and replace the air cleaning filter.
Addresses issues like unit not running, blinking lamps, or compressor stopping.
Solutions for problems with cooling, heating, or airflow performance.
Explanations for clicking sounds and specific lamp/outdoor unit behavior.
