Argo NOVITECH 330 - Page 8

 




HOW TO USE
1. Check the thickness of the laminating pouch and select one of the settings on the front
panel. The machine can laminate the pouch with 75-100 or 125 micron thickness.
2. Turn the machine on by turning the ON/OFF switch to „I“ , The power light will come on
at the same time.(Fig.1)

3. The red heating light comes on indicating the laminator is heating up.The process will
last for approx. 5 mins till green ready light comes on.(Fig.2)
  
 

 (Fig.2)
 
Note:


