Assemble Instructions
Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
22
Made in China
B - Velcro Strap x 2
I - Pump x 1
3 4
Insert the elbow connectors (E) into one frame tube,
ensuring the strap holes face the same way and will be
parallel to the oor after construction.fl
Place one end of the goal on a clean rm surface. Holding the fi
top of the frame tubes, push downwards slowly. The frame tubes
will bow, allowing you to push together the elbow connector at
the top of the goals.
Turn the goal over and repeat.
D
D
E
E
D
E
5
6
To connect the velcro strap (B), loop through the holes on
the elbow connector and attach to the connecting velcro
section on the strap. Place the connected end on a clean,
firm surface. Carefully bend the goal and repeat on other
end of the goal.
Note: To secure frame rmly to ground always anchor one peg at fi
each anchor point as indicated.
Caution:
Check regularly that pegs are secure.
Loose pegs may cause injury.
Care should be taken when using a mallet as misuse may cause injury.
When assembled the goal is under tension. Extreme care must be
taken when disassembling.
Position the assembled goals in place and x to the ground fi
using the 3 ground pegs (F ) per goal.
B
F
To Previous Page
Loading...