ARGtek ARG-1211 - Page 4

V. ARG-1211 provides four operation modes: (Gateway、Bridge、WISP、AP Client)
With 7 Applications:
1. Gateway
AP mode(enable Router function)
2. Bridge (disable Router function)
2-1. Bridge AP
AP mode(disable Router function)
2-2. Bridge Client
Client mode(disable Router function)
2-3. Bridge WDS
Wireless Distribution System Bridge
2-4. Bridge WDS + Repeater
WDS and repeater(AP)
3. WISP
Client mode(enable Router function)
4. AP Client(Universal Repeater)
WISP and repeater(AP)
1.Gateway (AP Router) ： (enable Router function)
This feature is often used when connect PPPoE broadband operators offer, DHCP (dynamic) or Static (fixed)
IP and use port forwarding (NAT) and routing functions
2-1. Bridge AP : AP mode (disable Router function)