Argus C3 - COMPLETING THE ARGUS C-4 REASSEMBLY

you
ottocho
ground glossto
the
focol
plone,
youconscrew
in
the
iens until
on
infinity
torgetviewed
on
theground
glossis in
shorp
focus.
First,
loosen the three
spline
screws oround
the knurled
lens
odiusting ring, Fig.
28.
Now,
while
wotching
the
ground gloss
imogeofon infinity
torget,
screw in the
lensuntil
the imoge
isot
its
shorpest focus.'Without
chonging
the lens
position,
roJqte
the
lens
odiusting ring until
the hole
for the lens
pin screw, Fig,.28,
oligns *ith the
slot
in
the focusing
ring. Then,
reploce the
lens
pin screw ond tighten
the three
spline
screws
oround the
lens
odiusting ring.
The
remoining reossembly
procedure
iust
involves
reversing
the order of
your
disossembly.