Argus cosina 704 - Page 16

PRISE DE COMMANDE A DISTANCE
REMOTE CONTROL SOCKET
i
CABLE RELEASE SOCKET
| PRISE DU CABLE DECLENCHEMENT
A remote control cord (available from your Argus dealer) can be
attached in the REMOTE CONTROL SOCKET. When installed, de-
press the trigger release all the way and lock it in the RUN position
with the release lock lever. Locking the release in this way will not
run the camera. Filming is then started by pushing the remote con-
trol switch to ON.
A cable release (available from your Argus dealer) can be attached in
the CABLE RELEASE SOCKET. Any ASA American-thread release
will fit. The cable release, when depressed, starts the camera's drive
motor and permits a single frame at a time to be exposed for making
titles, animated sequences, or time-lapse movies.
NOTE: The camera motor will continue to run as long as the cable
release is depressed, but the shutter is activated to expose only one
frame each time you depress and release the cable plunger. Remote
control and single frame filming should be done on a tripod.