EN - 11
11. Rotate steering levers to operating position
and install eccentric spacer between
steering lever plates. Secure with hardware.
See Figure 8.
12. Adjust steering levers. See Adjust Steering
Levers on page 24.
13. Check tire pressures and inflate to
recommendation.
See Check Tire
Pressure on page 19. See Specifications
on page 39.
14. Make sure deck is level. See Level and
Pitch Mower Deck on page 34.
15. Ensure all hardware is tight.
Figure 8
1. Eccentric Spacer
2. Steering Lever
3. Steering Lever Plate
1
2
3
To Next Page
Loading...
Need help?
General
