ARIETE 583 - Accessory Usage and Cleaning; Use of Multimill; Use of Grinding Mill; Cleaning Procedures

EN
- 6 -
USE OF MULTIMILL
Multimill blade unit (Fig. 6A)
- Insert the ingredients into the container (L).
note: Fill the container (L) with fresh ingredientes till MAX level (meat 75 g).
Don’t introduce any liquid.
- Close by rotating the multimill blade (M) on the container (L) clockwise (Fig. 7).
- Position the assembled grinder, tightly closed, onto the motor unit (F) and rotate it clockwise until
it locks (Fig. 8).
- Plug the appliance in and, through the operating dial (G), select the pulse functioning for 2-3 times
for a first grinding. Choose then “1” or “2” as operating speed for fresh ingerdients.
- For meat: Start with speed 3 for 2 second, and speed 4 for 3 second (max working time 5 sec).
- To remove the blade from container, rotate it counterclockwise and extract it
USE OF GRINDING MILL
Grinding mill blade unit (Fig. 6B)
- Insert the ingredients into the grinder container (H) till MAX level.
note: The max amount to insert into the container (H) is 50 g of coffee and spices for a max working
time of 30 seconds.
WARNING:
Use dried ingredients only.
- Close by rotating the coffee grinder blade (I) on the container (H) clockwise (Fig. 7).
- Position the assembled grinder, tightly closed, onto the motor unit (F) and rotate it clockwise until
it locks (Fig. 8).
- Plug the appliance in and, through the operating dial (G), select the pulse functioning for 2-3 times
for a first grinding. Choose then “1” or “2” as operating speed.
- To remove the blade from container, rotate it counterclockwise and extract it
CLEANING
Do not disassemble the appliance or try to intervene in any way inside it. Keep the appliance proper-
ly clean and tidy to ensure an optimal quality of prepared food and a longer life of the machine itself.
- The goblet (C), lid (B), measuring cup (A), grinding mill container (H) and multimill container (L)
can be washed in the top rack of the dishwasher.
- Use a slightly damp cloth to clean the motor unit.
Never clean with potentially abrasive products.
- Clean thoroughly the blade that can be removed from the goblet and from mill containers.
WARNING
:
Never place the appliance body, plug or power cord in water or other liquids; always wipe
clean with a damp cloth.
Always switch off the product unplug the power cord from the electricity mains before fit-
ting or removing single attachments or before cleaning the appliance.
Particular care must be taken when cleaning the blade because it is extremely sharp.