EasyManuals Logo

Ariston 30 Multis Instructions For Installation, Use, Maintenance

Ariston 30 Multis
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
EN
14
safety group), if supplied together with the appliance; trip it from
time to time to ensure that it is not jammed and to remove any
scale deposits.
11. It is normal that water drips from the overpressure safety de-
vice when the appliance is heating. For this reason, the drain
must be connected, always left open to the atmosphere, with a
drainage pipe installed in a continuous downward slope and in a
place free of ice.
12. Make sure you drain the appliance and disconnect it from the
power grid when it is out of service in an area subject to subzero
temperatures.
13. Water heated to over 50 °C can cause immediate serious burns
if delivered directly to the taps. Children, disabled persons and
the aged are particularly at risk. We recommend installing a
thermostatic mixer valve on the water delivery line, marked with
a red collar.
14. Do not leave ammable materials in contact with or in the vicin-
ity of the appliance.
15. Do not place anything under the water heater which may be
damaged by a leak.

Other manuals for Ariston 30 Multis

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ariston 30 Multis and is the answer not in the manual?

Ariston 30 Multis Specifications

General IconGeneral
BrandAriston
Model30 Multis
CategoryWater Heater
LanguageEnglish

Related product manuals