Ariston 3319089 - Page 33

\ 33
GB
SENSYSSENSYS GATEWAY
BUS
fi g.4
fi g.5
Type 3
Activation of RD and RC in a system with Sensys already installed.
Ariston basic heating system equipped with BridgeNet BUS protocol, with the Ariston
Sensys accessory already installed, in which the user wishes to activate Remote Con-
trol and Remote Assistance:
- Initial situation (Fig. 4)
- Final situation (Fig. 5)
BUS
NOTE:
In order to avoid interference problems, use a shielded cable or twisted pair ca-
ble. The following versions of the Ariston Sensys software are not compatible
with Ariston Net:
- 01.00.00
- 01.00.04
In such case, the existing Sensys device must be replaced with a new one.