36 /
GB
BUS
TA
BUS
fi g.5
fi g.6
Type 3
Activation of RD and RC in a system with 2 hydraulic zones (with integrated or ex-
ternal zone manager) controlled by BridgeNet BUS and ON/OFF devices (Fig. 5)
System fi tted with the Ariston product, to which BridgeNet Bus zone management ac-
cessories are connected, such as Ariston Sensys and/or ON/OFF devices.
It is possible to remotely control the cooling function, if available.
Actions required (Fig. 6):
- Install the gateway, connecting it to the heating system via the BridgeNet BUS
connection.
- Replace the ON/OFF device with Ariston Sensys
SENSYS
ZONE
MANAGER
ZONE
MANAGER
GATEWAY
SENSYS
THERMOSTAT
To Next Page
Loading...