\ 39
GB
BUS
BUS
SENSYSGATEWAY
fi g.11
fi g.12
Type 6
Activation of RD and RC in a basic hybrid system with domestic water cylinder
(Fig. 11)
System in which the Ariston product is connected exclusively to a single temperature
regulation accessory and the Ariston Net Remote Control and Remote Assistance
services must be activated. It is possible to remotely control the cooling function, if
available.
Actions required (Fig. 12):
- Install the gateway by connecting it to the heating system via the BridgeNet BUS
connection.
SENSYS
To Next Page
Loading...