10
launam s’resu
气种转换
维护
Auto button - Temperature adjustment activation
The AUTO function enables boiler operation to be adapted to
environmental conditions and to the type of system it is installed on.
Comfortable temperature is reached inside the room in the quickest
ciency, while
substantially reducing the amount of wear experienced by the
components.
Your installer will advise you on the devices connectable
to the boiler and will program it according to the system.
In normal boilers the water temperature inside the heating elements
ective
heating during the few really cold winter days. It then becomes
excessive on less cold days (of which there are many) more typical of
the autumn and winter seasons. This leads to excessive room heating
, resulting in energy waste
and uncomfortable conditions inside the room.
The AUTO function “takes control” of the boiler and selects the best
operating regime based on environmental conditions, external
devices connected to the boiler and the performance required. It
constantly decides at which power level to operate based on the
environmental conditions and the room temperature required.
epyt sag fo egnahC
THE CHANGE OF GAS TYPE from Natural Gas (G20) to
Gas (G31) or vice versa, IS FORBIDDEN.
Maintenance
Schedule an annual maintenance check-up for the boiler with a
competent person.
Correct maintenance always results in savings in the cost of running
the system.
Failure to arrange an annual service for the appliance will invalidate
the second year of the manufacturers guarantee.
Auto -
AUTO
AUTO
AUTO
不安排采暖炉年度服务，第二年的厂家质保将无效。
用户手册
To Next Page
Loading...
