8
manuale d’uso user’s manual
24/01/2012 15:22
40°C 70°C
01/01/2000 00:00
44°C
Regolazione temperatura sanitario
GENUS EVO
È possibile regolare la temperatura dell’acqua
sanitaria premendo i tasti 2 +/-; si ottiene una
temperatura variabile da 36°C a 60°C.
Il valore prescelto viene visualizzato sul
display lampeggiante.
Domestic hot water temperature
adjustement
GENUS EVO
It is possible to set the temperature of
the domestic hot water by pressing the
buttons 2 a temperature may be obtained
which varies from 36°C to 60°C.
The value set previously will ash on the
display.
Interruzione riscaldamento
Per interrompere il riscaldamento premere il
tasto MODE 9, dal display scompare il simbolo
. La caldaia rimarrà in funzionamento
estivo per la sola richiesta di acqua calda
ad uso sanitario, indicando la temperatura
impostata.
Switching o the heating
To switch o the heating, press the MODE
button 9; the heating operation symbol
will disappear from the display.
The boiler remains active only for the
production of domestic hot water,
indicating the set temperature.
Switching o the boiler
To switch o the boiler press the ON/OFF
button , the display will switch o .
The Anti-frost Function is allready active.
ATTENTION!!
Switch o the boiler completely by
switching the external electrical switch to
the OFF position. Shut o the gas valve.
OFF
Procedura di spegnimento
Per spegnere la caldaia premere il tasto ON/
OFF
, il display si spegne.
La funzione antigelo è attiva.
IMPORTANTE!!
Per spegnere completamente la caldaia
portare l’interruttore elettrico esterno in
posizione OFF. Chiudere il rubinetto del gas.
24/01/2012 15:22
40°C 72°C
Regolazione riscaldamento
È possibile regolare la temperatura dell’acqua
di riscaldamento premendo i tasti 12 +/-, si
ottiene una temperatura variabile da 35°C a
82°C.
Il valore prescelto viene visualizzato sul
display.
Adjusting the heating
It is possible to set the temperature of the
heating water by pressing the buttons 12 +/-.
The temperature that may be obtained.
which varies from 35°C to 82°C.
The value set previously will ash on the
display.