How to fix Ariston LBF 51 when it does not start?
If your Ariston dishwasher doesn't start, there might be a few simple reasons: * Ensure the plug is correctly inserted into the electrical socket and that there is power in your home. * Make sure the dishwasher door is fully closed. * Check if a delayed start has been programmed.
What to do if Ariston LBF 51 Dishwasher doesn't drain water?
If your Ariston dishwasher isn't draining water, it could be due to a few reasons. First, check if the dishwasher cycle has fully finished. Also, inspect the water inlet hose to ensure it isn't bent, and make sure the drain duct isn't blocked. Lastly, the filter might be clogged with food residues.
What to do if Ariston LBF 51 doesn't take in water?
If your Ariston dishwasher isn't taking in water and the Salt, Rinse Aid, Drying and End indicator lights are flashing, this could mean there's no water in the mains supply or the water inlet hose is bent. Try turning on the tap; the appliance should start after a few minutes. Also, if the appliance is locked because no action was taken when the Salt and Rinse Aid indicator lights were flashing, switch off the machine using the ON/OFF button, turn on the tap and switch the machine back on after 20 seconds by pressing the same button. Then, re-program the machine and restart the wash cycle.
Why are my dishes covered in white film after using Ariston LBF 51 Dishwasher?
If your dishes and glasses from your Ariston dishwasher are covered in a white film or limescale deposits, it might be because the level of refined salt is low, or the dosage setting isn't suited to the hardness of the water. Also, check that the lid on the salt dispenser is properly closed. It could also be that the rinse aid has been used up or the dosage is too low, or the crockery is made from non-stick material.
Why does my Ariston Dishwasher leave streaks on glasses?
If your dishes and glasses are streaked or have a bluish tinge after using your Ariston dishwasher, it could be that the rinse aid dosage is too high.
How to improve drying in Ariston Dishwasher?
If your crockery isn't drying properly in your Ariston dishwasher, it could be due to a wash cycle being selected without a drying program. Also, the rinse aid may have been used up, or the dosage might be too low. Check that the rinse aid dispenser setting is high enough.
Why are dishes not clean after Ariston LBF 51 Dishwasher cycle?
If your dishes are not clean after using your Ariston dishwasher, several factors could be the cause: * The racks might be overloaded. * The crockery may not have been arranged well. * The sprayer arms might not be able to move freely. * The wash cycle might be too gentle. * An excessive amount of foam might have been produced because the detergent wasn't measured correctly or isn't suitable for dishwashers. * The lid on the rinse aid compartment might not be shut correctly. * The filter might be dirty or blocked. * The refined salt level might be low.
What does it mean when Salt, Rinse Aid and Drying lights flash on Ariston Dishwasher?
If the Salt, Rinse Aid and Drying indicator lights are flashing on your Ariston dishwasher, signaling a water loading solenoid valve malfunction alarm, try switching off the appliance by pressing the ON/OFF button and then switching it back on after a minute. If the alarm continues, shut off the water tap to eliminate the risk of flooding, remove the plug from the electrical socket and contact Assistance.
Why is my Ariston LBF 51 making so much noise?
If your Ariston dishwasher is making excessive noise, it could be because the dishes are rattling against each other or against the sprayer arms. Another cause might be an excessive amount of foam due to incorrect detergent dosage or using a detergent not suitable for dishwashers.
What to do for Ariston LBF 51 Dishwasher water inlet hose alarm?
If the Salt, Rinse Aid, Washing, Drying and End indicator lights are flashing on your Ariston dishwasher, indicating a water inlet hose alarm or a blocked water inlet filter, switch off the appliance by pressing the ON/OFF button. Shut off the water tap to prevent flooding and remove the plug from the electrical socket. Also, check if the water inlet filter has been blocked by impurities.
General| Brand | Ariston |
|---|---|
| Model | LBF 51 |
| Category | Dishwasher |
| Language | English |
To Next Page
