28 / EN
Introduction
Dear Madam,
Dear Sir,
thank you for choosing the SENSYS HD interface.
This manual was drawn up to inform you on how to install and
use the SENSYS HD interface, in order to allow you to optimally
use all its functions.
Store this booklet, as it contains all the necessary information
regarding the product following its initial installation.
To find the nearest Technical Assistance Service and to consult
the multimedia copy of the documentation, you can connect
to the Internet website www.ariston.com.
Please also refer to the Warranty Certificate that you will find
inside the packaging, or which was handed to you by the in-
staller.
NOTE: remote connectivity is only available in conjunction
with the ARISTON Wi-Fi module. Find out more on
www.ariston.com
Symbols used throughout this manual
and their meaning
i
WARNING Indicates important information
and particularly delicate operations.
a
WARNING: DANGER Indicates actions that,
if not performed correctly, can lead to gener-
al injuries or malfunctions or material dam-
ages to the appliance; they therefore require
special attention and adequate training.
Warranty
The ARISTON product is covered by a conventional warranty,
which takes effect from the date of purchase of the appliance.
For the warranty conditions, refer to the warranty certificate ac-
companying the product.
Cleaning
Delicately clean the surfaces with a clean, non-fluffy cotton
cloth, moistened with a mix of 70% isopropyl alcohol e 30%
water (commonly known as “methylated spirits”). Do not use fi-
brous materials, such as paper towels. The cloth must be moist
but not soaking wet, so as to avoid any drips. Make sure that no
liquid seeps into the device or in the spaces around the panel
or front button. If liquid comes into contact with the inside of
the device, it may cause significant damage or faults.
Do not spray any liquid directly onto the device.
Disposal
PRODUCT CONFORMING TO EU DIREC-
TIVE 2012/19/EU and to Italian Legisla-
tive Decree 49/2014 pursuant to Art. 26
of Legislative Decree no. 49 of 14 March
2014, “Implementation of Directive
2012/19/UE on waste of electrical and
electronic equipment (WEEE)”.
The barred wheeled bin symbol appearing on the appliance or
on its packaging indicates that the product must be collected
separately from other waste at the end of its useful life.
The user must therefore deliver the decommissioned product
to an appropriate local facility for separate collection of electro-
technical and electronic waste. Alternatively, the appliance to
be scrapped can be delivered to the dealer when purchasing a
new equivalent appliance.
Proper separated collection of the decommissioned appliance
for its subsequent recycling, treatment and eco-compatible
disposal helps to prevent negative effects on the environment
and human health, besides encouraging reuse and/or recy-
cling of its constituent materials.
EN
To Next Page
Loading...
